Annuncio

Collapse
No announcement yet.

Investimenti in cryptomonete

Collapse
X
 
  • Filter
  • Ora
  • Show
Clear All
new posts

  • Investimenti in cryptomonete

    Salve, secondo voi investire in moneta elettronica avrebbe senso? 1 bitcoin costa approssivamente 100€... Contando che 2 anni fa costava 5 centesimi... Pensavo anche ai litecoin che costano circa 1.8€ quindi se ne potrebbero acquistare di più sperando in un aumento di valore... Cosa ne pensate? Aggiungo che non mi interessa minare ne bitcoin, che ormai senza asic che costano un occhio non fai niente, ne litecoin che anche li senza GPU potenti consumi più di corrente che altro...

  • #2
    Aspetta che Edmond Dantes ne sà qualcosa !

    Comment


    • #3
      Originariamente Scritto da Bernie Madoff Visualizza Messaggio
      Salve, secondo voi investire in moneta elettronica avrebbe senso? 1 bitcoin costa approssivamente 100€... Contando che 2 anni fa costava 5 centesimi... Pensavo anche ai litecoin che costano circa 1.8€ quindi se ne potrebbero acquistare di più sperando in un aumento di valore... Cosa ne pensate? Aggiungo che non mi interessa minare ne bitcoin, che ormai senza asic che costano un occhio non fai niente, ne litecoin che anche li senza GPU potenti consumi più di corrente che altro...

      vedi i miei post sull'argomento (basta che dai come chiave di ricerca <bitcoin, radeon, o 7870>... vedi anche <WVO o patatine fritte> ( che è la chiave di volta per capire dove stà il guadagno...

      l'affare nelle cripto valute sono sicuro che ci sia, ed infatti è da ferragosto che sto combattendo con linux per capire cosa funziona meglio per minare...

      ho assemblato una macchina con due x 7870 radeon che funziona ma non ha ancora raggiunto un risultato ottimale....

      sto facendo delle prove...

      poi tre giorni fa ho scoperto che c'è una distribuzione linux dedicata : BAMT ma mi sono piantato !! oggi ho combattuto tutto il giorno e sono esausto...

      stavo cercando di postare un report di help sul forum https://bitcointalk.org

      ma non riesco a farmelo accettare....

      dategli un occhiata...



      hi friends, I ask a help:
      I installed the linux distribution BAMT mining distro (New version 1.1), <not on usb pen driver but on hd0 (internal sata hd 80Gb)>
      on a machine with single GPU Radeon 7870.


      after a couple of attempts (some difficulty to determine
      the best partitioning HD0) the OS linux runs perfectly
      like all standard applications ....


      the problem is that the launch of cgminner, this opens
      a shell with fast alerts of errors "unreadable" and follow the screen appears with a red background and the terrifying message: "error gpu0 default"


      I show in my attached configuration files


      I would be grateful if you could check where am I wrong?
      may just be a simple syntax error?


      you could compare them with your "config files"?


      Thank you in advance


      I have not yet begun to mining, but to anyone who will be kind enough to provide some help, just send Mining, 5 litecoins (by way of thanks)


      thanks
      ____________________________________________
      # autoconf.conf


      ---
      autoconf:
      do_autoconf_server: 0
      do_autoconf_client: 1

      client_verbose: 1
      server_verbose: 1


      client_daemon: 1
      server_daemon: 1


      submit_port: 54546
      announce_port: 54544
      monitor_port: 54545

      cmd_restart_mining: /etc/init.d/mine restart
      cmd_stop_mining: /etc/init.d/mine stop
      cmd_start_mining: /etc/init.d/mine start
      cmd_coldreboot: sync;coldreboot
      cmd_show_uname: uname -a
      cmd_show_uptime: uptime
      cmd_show_config: cat /etc/bamt/bamt.conf
      cmd_show_pools: cat /etc/bamt/pools
      cmd_fixer_all: /opt/bamt/fixer --all
      --------------------------------------------------------------------------------------------
      # bamt.conf
      # Big A Miner Thing configuration
      # full example of options available in /etc/bamt/bamt.conf


      ---
      settings:


      # miner info used in alerts, etc


      # id is used to set hostname and identify this rig in farm wide displays
      miner_id: bamt-miner
      # loc is any addition string you wish to use to identify this rig (location?)
      miner_loc: unspecified location


      # sending status to mgpumon..


      # send directly to IP address (only needed if mgpumon is on different network)
      # do_direct_status: 192.168.1.1


      # and/or broadcast on local IP network 1 = yes, 0 = no
      # recommend to leave enabled, harmless and very handy
      do_bcast_status: 1


      # central config managment? 1 = yes, 0 = no (sensing a pattern here?)
      do_manage_config: 1


      # command to run for config updates, this is just one example..
      # note this is old school, pre autoconf but still a fine way to do things if you prefer it
      # config_update_cmd: /usr/bin/rsync -aL rsync://192.168.1.1:873/config/miner1/* /etc/bamt/




      # how long to wait for X to start (seconds) - increase if mining fails to start at boot
      # slower machines or booting from slow USB key may need as long as 60 seconds here
      start_mining_init_delay: 20


      # delay in between starting individual GPUs (seconds) - increase if gpus lock during mining init
      start_mining_miner_delay: 3


      # api keys for gpumon, all optional


      # apikey_btcguild:
      # apikey_deepbit:
      # apikey_bitclockers:
      # apikey_slush:
      # apikey_bithasher:
      # apikey_mtred:
      # apikey_ozcoin:
      # apikey_nofee:
      # apikey_rfc:
      # apikey_polmine:
      # apikey_btcpool:
      # apikey_triple:
      # apikey_abc:


      -------------------------------------------------------------------------------------------
      # cgminer.conf
      {
      "pools" : [
      {
      "url" : "http://mine.pool-x.eu:8337/",
      "user" : "estwind.01",
      "pass" : "cazz1"
      },
      {
      "url" : "http://mine.pool-x.eu:8337/",
      "user" : "estwind.02",
      "pass" : "zz2"
      },
      {
      "url" : "http://mine.pool-x.eu:8337/",
      "user" : "estwind.03",
      "pass" : "zz3"
      },
      {
      "url" : "http://mine.pool-x.eu:8337/",
      "user" : "estwind.04",
      "pass" : "zz4"
      },
      {
      "url" : "stratum+tcp://litepool.eu:3333/",
      "user" : "estwind.01",
      "pass" : "mi1"
      },
      {
      "url" : "stratum+tcp://litepool.eu:3333/",
      "user" : "estwind.02",
      "pass" : "mi2"
      },
      {
      "url" : "stratum+tcp://litepool.eu:3333/",
      "user" : "estwind.03",
      "pass" : "mi3"
      },
      {
      "url" : "stratum+tcp://litepool.eu:3333/",
      "user" : "estwind.04",
      "pass" : "mi4"
      },
      {
      "url" : "stratum+tcp://hk.ltcrabbit.com:3333/",
      "user" : "estwind.01",
      "pass" : "na1"
      },
      {
      "url" : "stratum+tcp://hk.ltcrabbit.com:3333/",
      "user" : "estwind.02",
      "pass" : "na2"
      },
      {
      "url" : "stratum+tcp://hk.ltcrabbit.com:3333/",
      "user" : "estwind.03",
      "pass" : "na3"
      },
      {
      "url" : "stratum+tcp://hk.ltcrabbit.com:3333/",
      "user" : "estwind.04",
      "pass" : "na4"
      }
      ]
      ,
      "intensity" : "18",
      "vectors" : "1",
      "worksize" : "256",
      "kernel" : "scrypt",
      "lookup-gap" : "2",
      "thread-concurrency" : "15500",
      "shaders" : "0",
      "api-port" : "4028",
      "expiry" : "120",
      "gpu-dyninterval" : "7",
      "gpu-platform" : "0",
      "gpu-threads" : "1",
      "gpu-engine" : "0",
      "gpu-memclock" : "0",
      "gpu-powertune" : "0",
      "log" : "5",
      "no-pool-disable" : true,
      "queue" : "1",
      "scan-time" : "60",
      "scrypt" : true,
      "shares" : "0",
      "kernel-path" : "/usr/local/bin"
      }


      ----------------------------------------------------------------------------------------
      # pools


      # BAMT pools file
      #
      # Specify one line per pool. The simple form is just the complete URL
      # including worker login, for example:
      #
      # http://yourmom:[email protected]:8332/
      #
      # If the pool specified on the first line doesn't generate a share
      # within the allowed window (180 seconds by default), BAMT moves to
      # the next line in the file (or wraps to the beginning)
      #
      # By default, BAMT will not change pools unless there is a problem
      # with the one it's using. This means if it switches to the second or third
      # pool in your file, it will stay there as long as that pool keeps working.
      #
      # You can have more control failover/back by adding one or two numbers to the end of
      # the URLs, seperated with commas. For example:
      #
      # http://u@pool3.bitclockers.com:8332/,10,60
      #
      # The first number is the maximum shares to complete before exiting. The second
      # is an optional override for the default pool_timeout in bamt.conf
      # You can omit the max shares if you only want to override pool_timeout by
      # leaving the number blank, ie: url,,number
      #
      # You can also specify a backup URL to Phoenix. Phoenix will attempt to pull
      # work from the backup when the primary fails. It will try to return to the
      # primary automatically. The maxshares and pooltimeout apply to the phoenix
      # instance as a whole, and shares from either pool count towards them.
      #
      # To specifiy a backup pool, put it in the 4th position. You can leave the other
      # fields blank, but you must use commas to delimit them in any case.
      #
      # All parameters specified:
      # http://u@mypool.com,10,60,http://u@mybackuppool.com
      #
      # Only primary and backup specified
      # http://u@mypool.com,,,http://u@mybackuppool.com
      #


      # At very least, change the next line to a valid worker url:
      # http://u@mypool.com

      stratum+tcp://litepool.eu:3333/
      stratum+tcp://hk.ltcrabbit.com:3333/


      __________________________________________________ ________________________________________
      # config for cgsnoop cgsnoop.conf


      # defaults are to broadcast on standard mgpumon port
      # set broadcast to 0 if you dont want broadcast
      broadcast: 1
      broadcastport: 54545


      # to send status via routing, use direct: line as below
      #direct: 192.168.128.200:54545


      # specify each cgminer instance you want to pull status from
      # in the form:
      # iport,miner_id,miner location


      # for example:
      #192.168.128.50:4028,winminer1,unspecified location


      ---------------------------------------------------------------------------------------------------------
      # mgpumon.conf
      { "screen": 0, "genhttp": 1, "httpdir": "/tmp/mgpumon", "httpindex": "index.html", "httpcss": "/bamt/mgpumon.css", "debug": 0, "listen_port": 54545, "monitor_temp_hi": 80, "monitor_temp_lo": 45, "monitor_load_lo": 90, "monitor_hash_lo": 100, "monitor_fan_lo": 1000, "monitor_reject_hi": 3 }


      ------------------------------------------------------------------------------------------------------------
      # phoenix2.conf


      [general]
      autodetect = +cl -cpu #Use autodetect for all OpenCL devices, except those which are CPUs.
      verbose = True #Enable verbose logging?
      backend = http://your:worker@yourpool:8332 #The primary backend.
      # backups = http://user2[email protected]:8332 http://bitcoin:bitcoin@localhost:8332 #A space seperated list of backup servers.
      failback = 600 #Seconds between attempts to reconnect to primary backend when using backups. (0 to disable)
      queuesize = 1 #Target/maximum size of the queue
      queuedelay = 5 #Seconds before work expires to request more work (WARNING: don't change this unless you know what you are doing!)
      statusinterval = 1 #Seconds between statusbar updates
      ratesamples = 10 #Number of samples to average for hashrate reporting
      # logfile = #Set this option to log to a file.
      [web]
      disabled = False #Disable the RPC server?
      bind = 127.0.0.1 #IP to bind the RPC server to
      port = 7780 #RPC port MUST MATCH SETTING IN BAMT.CONF
      password = secret #RPC password MUST MATCH SETTING IN BAMT.CONF
      root = /var/www/phoenix #Root directory for the web server
      logbuffer = 1000 #How many logs to remember in the getlogs() RPC call


      # Hey, you. yeah, you. You must fix the stuff below to match your GPUs!


      [cl:0:0]
      autoconfigure = True #Automatically configure this device?
      kernel = phatk2 #The kernel to use for the device
      name = GPU 0 #The name to display the device as (default is device ID if not specified)
      start_undetected = False #Do not start the kernel if the device is not present
      disabled = False #Disable this device?
      worksize = 256 #Work group size, tweaking this option may improve performance
      vectors = True #Use unit2 vectors? (enable this or vectors4, not both)
      vectors4 = False #Use uint4 vectors? (enable this or vectors, not both)
      bfi_int = True #Use BFI_INT instruction on ATI VLIW GPUs?
      goffset = True #Use OpenCL 1.1 global offset?
      fastloop = True #Use fast internal loop? (ideal for low aggression)
      aggression = 19 #Number of nonces to test per kernel execution (lower value = less desktop lag, higher value = higher hashrate)
      [cl:0:1]
      autoconfigure = False
      kernel = phatk2
      name = GPU 1
      start_undetected = False
      disabled = False
      worksize = 256
      vectors = True
      vectors4 = False
      bfi_int = True
      fastloop = False
      aggression = 11
      [cl:0:2]
      autoconfigure = False
      kernel = phatk2
      name = GPU 1
      start_undetected = False
      disabled = False
      worksize = 256
      vectors = True
      vectors4 = False
      bfi_int = True
      fastloop = False
      aggression = 11
      ------------------------------------------------------------------------------
      Last edited by Edmond_Dantès; 01/09/2013, 19:44.

      Comment


      • #4
        Edmond, credo che la lunghezza del tuo messaggio sia una tantinello eccessiva per bitcointalk
        ad ogni modo provo a darti una mano, quando lanci il miner assicurati di lanciarlo come utente root.
        L'affare con bitcoin l'ha fatto chi ha iniziato a minare da subito e la scorsa primavera si è ritrovato il bitcoin a 200$....
        ps: equitalia mi ha pagato ala fine!

        Comment


        • #5
          Io ho appena comprato 6 Bitcoin.
          Le altre cryptomonete come litecoin sono utilizzate solo per minare con un hardware meno potente e poi convertire i litecoin in bitcoin.
          Credo che i litecoin per questo motivo avranno una crescita ma non come quella di bitcoin.

          Comment


          • #6
            e se fosse un ewallet legato ai metalli? O meglio un reseller di monete d'oro e d'argento che fungono da moneta fisica di scambio. Chi apre il conto ewallet per riempirlo acquista oro e argento fisico e scambia oro e argento fisico con gli altri utenti (merchant). L'utente quando decide di liquidare il metallo lo rivende allo stesso broker che fornisce l'ewallet (che lo acquista ad una tariffa privilegiata) o se preferisce gli viene spedito a casa direttamente dalla Svizzera, Singapore o Australia. Non è un sistema a startup cost free, ma potrebbe essere una buona alternativa alla "Banca". Semplicemente un dealer di metalli che offre ewallet. il metallo fisico dovrà essere tenuto in un vault sicuro e tax free nel mondo, ovviamente. let's sleep on it....
            I problemi non possono essere risolti allo stesso livello di conoscenza che li ha creati. Albert Einstein.

            Comment


            • #7
              Originariamente Scritto da Bernie Madoff Visualizza Messaggio
              Salve, secondo voi investire in moneta elettronica avrebbe senso? 1 bitcoin costa approssivamente 100€... Contando che 2 anni fa costava 5 centesimi... Pensavo anche ai litecoin che costano circa 1.8€ quindi se ne potrebbero acquistare di più sperando in un aumento di valore... Cosa ne pensate? Aggiungo che non mi interessa minare ne bitcoin, che ormai senza asic che costano un occhio non fai niente, ne litecoin che anche li senza GPU potenti consumi più di corrente che altro...
              Mi son fatto la mezza idea che queste valute valgono bene solo al momento della nascita/creazione . Da come ho capito ,nel Bitcoin , la difficoltà di produzione ( leggasi energia richiesta ) aumenta periodicamente e oggi siamo già a livelli duretti .
              Chi ha guadagnato nel bit coin l'ha fatto producendoli agli albori e tenendoseli belli stretti fino ad oggi , oppure acquistandoli quando il prezzo era ridicolo ( appunto 5 centesimi ) .
              Io ho giusto un infarinatura base-base , un paio di sere passate sui forum e nessuna esperienza diretta , ma se dovessi buttarmi sulle cryptomonete valuterei le "new entry" , quelle che ora sono a basso costo e ad alta resa di produzione ,piuttoste che ad un mercato saturo dove servono miner da migliaia di euro per produrre 1 bitcoin/giorno .

              Comment


              • #8
                Beh scusa ma secondo te i litecoin si alzeranno o sono destinati al fallimento?

                Comment


                • #9
                  Ripeto, mi sono solo interessato a livello superficiale . Per capire se i Lite si alzeranno si dovrebbe un pò seguire il background dei vari forum/blog , vedere che aria tira insomma . Dovessi mettermi io , così su due piedi , minerei un centinaio di Lite e altre monete "economiche" ,in modo da crearle velocemente e con poca spesa e me le terrei da parte .
                  Nel momento in cui i Bit diverranno troppo onerosi , la clientela inizierà a migrare verso altre monete .
                  Sempre "a naso" mi sembra tutto una situazione molto nerd ,e in questi ambienti le mode possono cambiare in fretta ( vedi l'ascesa del bitcoin )

                  Comment


                  • #10
                    Originariamente Scritto da afratton Visualizza Messaggio
                    Sempre "a naso" mi sembra tutto una situazione molto nerd
                    Assolutamente si!

                    Comment


                    • #11
                      sono parzialmente d'accordo. I bitcoin vengono accettati per i pagamenti in diverse attività commerciali all'estero.

                      Notizie, recensioni, guide all'acquisto e approfondimenti per tutti gli appassionati di computer, smartphone, videogiochi, film, serie tv, gadget e non solo


                      Le altre cryptomonete non credo arriveranno a questo livello

                      Comment


                      • #12
                        Provo a buttarla cosi:...ma provare a minare con i chromebook???...hanno una architettura linux e niente fronzoli!

                        Comment


                        • #13
                          Ormai per i bitcoins senza asic non vai da nessuna parte... per i litecoins senza schede video davvero potenti neanche... Potresti provare a minare monete alternative ma a quale scopo? Al posto di comprarmi una birretta mi compro X cryptomonete qualsiasi e sicuramente ne avrei di piu di minare sei mesi con un chromebook...

                          Comment


                          • #14
                            Leggevo che stanno iniziando a usare il Raspberry pi assieme alle FPGA per minare

                            Comment


                            • #15
                              Guardati questo...



                              GoldStrike1 ASIC – 25TH/s Pack

                              $139,750

                              Non te lo regalano...

                              Comment

                              Working...
                              X